~45 64 EOPNOTSUPP operation not supported on socket
~44 64 ESOCKTNOSUPPORT socket type not supported
~43 33 dsSystemFileErr the Mac can’t find System file to open (sad Mac only)
~42 33 dsBadStartupDisk the Mac is unable to mount boot volume (sad Mac only)
~41 33 dsFinderErr the Mac can't load the Finder
~40 64 EMSGSIZE message too long
~39 64 EDESTADDRREQ destination address required
~38 64 ENOTSOCK socket operation on non-socket
~37 64 EALREADY
~35 64 EDEADLK call would block so was aborted
~34 64 ERANGE math result not representable
~33 33 negZcbFreeErr ZcbFree has gone negative
~32 64 EPIPE broken pipe
~31 33 dsNotThe1 that was not the disk I wanted
~30 33 dsReinsert a “request user to reinsert off-line volume” message was issued
~28 33 dsStknHeap the stack has moved into application heap
~27 33 dsFSErr the file system map has been trashed
~26 33 dsBadLaunch the Mac can't launch the file
~25 33 dsMemFullErr the Mac is out of memory
~24 33 dsNoPk7 package 7 was not present
~23 33 dsNoPk6 package 6 was not present
~22 33 dsNoPk5 package 5 was not present
~21 33 dsNoPk4 package 4 was not present
~20 33 dsNoPk3 package 3 was not present
~19 33 dsNoPk2 package 2 was not present
~18 33 dsNoPk1 package 1 was not present
~17 33 dsNoPackErr package 0 was not present
~16 33 dsFPErr a Floating point error occurred
~15 33 dsLoadErr there was a Segment Loader Error
~14 33 dsIOCoreErr an I/O Core Error occurred
~13 33 dsIrqErr there was an uninstalled interrupt error
~12 33 dsCoreErr there was an unimplemented core routine error
~11 33 dsMiscErr there was a miscellaneous hardware exception error
~10 33 dsLineFErr a line 1111 trap error occurred
~9 33 dsLineAErr a line 1010 trap error occurred
~8 33 dsTraceErr a trace mode error occurred
~7 33 dsPrivErr a privilege violation error occurred
~6 33 dsOvflowErr an overflow trap error occurred
~5 33 dsChkErr a check trap error occurred
~4 33 dsZeroDivErr a divide by zero error occurred
~3 33 dsIllInstErr an illegal instruction was found
~2 33 dsAddressErr an address error occurred
~1 33 dsBusError a bus error occurred
~0 noErr the operation succeeded
~-1 33 qErr a system structure was not in its queue
~-2 33 vTypErr the QType field of an entry in the vertical retrace queue isn't “vType”
~-3 33 corErr a core routine number was out of range
~-4 33 unimpErr the routine or function is not implemented
~-5 33 SlpTypeErr the QType field of an entry in the queue isn't correct
~-8 33 seNoDB no debugger is installed
~-12 33 dsHD20Installed HD20 Startup
~-17 41 controlErr this driver can't respond to this control call
~-18 41 statusErr this driver can't respond to this status call
~-19 41 readErr this driver can't respond to read calls
~-20 41 writeErr this driver can't respond to write calls
~-21 41 badUnitErr the driver reference number doesn't match any found in the unit table
~-22 41 unitEmptyErr the driver reference number specifies a NIL handle in unit table
~-23 41 openErr the requested read/write permission doesn't match the driver's open permission or an attempt to open the RAM serial driver failed
~-24 41 closeErr permission to close .MPP driver was denied
~-25 41 dRemovErr an attempted was made to remove an open driver
~-26 41 dInstErr the driver could not be found in the resource file
~-27 41 abortErr the I/O request was aborted by KillIO
~-28 41 notOpenErr the driver isn't open
~-29 41 unitTblFullErr the unit table is full
~-30 41 dceExtErr there was a DCE extension failure
~-33 105 dirFullErr the folder (directory) is full
~-34 105 dskFullErr the disk is full
~-35 105 nsvErr no such volume exists
~-36 105 ioErr an I/O error occurred (bummers)
~-37 105 bdNamErr the filename was invalid
~-38 105 fnOpnErr the file is not open
~-39 105 eofErr the logical end-of-file was reached while reading
~-40 105 posErr an attempt was made to access data before the start of the file
~-41 105 mFulErr memory is too full to open or access the file
~-42 105 tmfoErr there are too many files open
~-43 105 fnfErr the file was not found
~-44 105 wPrErr diskette is write protected
~-45 105 fLckdErr file is locked
~-46 105 vLckdErr volume is locked
~-47 105 fBsyErr the file is busy (delete)
~-48 105 dupFNErr duplicate filename (rename)
~-49 105 opWrErr file already open with with write permission
~-50 105 paramErr there was an error in the user parameter list
~-51 105 rfNumErr the file reference number specifies a bad folder (directory) structure
~-52 105 gfpErr there was an error during GetFPos
~-53 105 volOffLinErr the specified volume has been ejected
~-54 105 permErr an attempt was made to open locked file for writing
~-55 105 volOnLinErr the specified volume is already mounted
~-56 105 nsDrvErr the specified drive does not exist
~-57 105 noMacDskErr the disk is an unknown type
~-58 105 extFSErr there was an external file system error
~-59 105 fsRnErr there was a problem during rename
~-60 105 badMDBErr the master directory block is bad
~-61 105 wrPermErr you don’t have permission to change the file
~-64 noDriveErr the drive isn't connected
~-65 offLinErr there is no disk in the drive
~-66 noNybErr this disk is probably blank
~-67 noAdrMkErr an address mark could not be found
~-68 dataVerErr a read/verify/compare operation failed
~-69 badCksmErr the file has a bad checksum
~-70 badBtSlpErr a bad address mark was found
~-71 noDtaMkErr a data mark could not be found
~-72 badDCksum a bad data mark checksum was found
~-73 badDBtSlp bad data mark bit slip nibbles were found
~-74 wrUnderrun a write underrun occurred
~-75 cantStepErr the drive can't step
~-76 tk0BadErr track zero could not be found on the disk
~-77 initlWMErr the disk controller chip could not be initialized
~-78 twoSideErr you tried to read side two of a disk in a single~-sided drive
~-79 spdAdjErr the disk speed could not be adjusted correctly
~-80 seekErr the requested disk track couldn’t be accessed
~-81 sectNFErr the requested disk sector couldn’t be found
~-84 firstDskErr the disk track couldn’t be verified
~-85 clkRdErr the system clock could not be verified
~-86 clkWrErr the time written to the system clock did not verify
~-87 prWrErr changes to the parameter RAM did not verify
~-88 prInitErr parameter RAM is uninitialized
~-89 rcvrErr there was an SCC receiver error
~-90 breakRecd the SCC chip received a Break command
~-91 102 ddpSktErr the socket number was wrong
~-92 102 eLenErr the packet is too large or the first entry of the write data structure did not contain the full 14–byte header
~-93 102 noBridgeErr no router is available
~-94 102 LAPProtErr a protocol handler is already attached, a node's protocol table is full, no protocol is attached, or protocol handler pointer was not NIL
~-95 102 excessCollsns there was a hardware error on the network
~-96 102 portNotPwr the serial port is not currently powered
~-97 102 portInUse the serial port is in use by another application
~-98 102 portNotCf thePRAM is not configured for this connection
~-99 51 memROZErr there was a ROZ error
~-100 82 noScrapErr the Clipboard Manager is not initialized
~-102 82 noTypeErr there is no data of the that type on the Clipboard
~-108 51 memFullErr not enough memory is left
~-109 51 nilHandleErr a master pointer was NIL
~-110 51 memAdrErr a reference was made to a bad address
~-111 51 memWZErr an attempt was made to operate on a free block
~-112 51 memPurErr an attempt was made to purge a locked block
~-113 51 memAZErr an “address in zone” check failed
~-114 51 memPCErr a Pointer check failed
~-115 51 memBCErr a Block check failed
~-116 51 memSCErr a Size check failed
~-117 51 memLockedErr the program tried to move a locked block
~-120 105 dirNFErr the folder (directory) was not found
~-121 105 tmwdoErr no free WDCB was available
~-122 105 badMovErr there was a move into offspring error
~-123 105 wrgVolTypeErr this volume is not an HFS volume
~-124 105 volGoneErr the AppleShare volume has been disconnected
~-125 62 updPixMemErr there isn’t enough memory to update a pixmap
~-126 mBarNFnd the MBDF was not found
~-127 hMenuFindErr the system could not find HMenu's parent in MenuKey
~-128 userCanceledErr you pressed the cancel button
~-145 80 noMemForPictPlaybackErr
~-147 80 regionTooBigError the region is too large or complex
~-148 80 pixMapTooDeepErr the pixel map is more than 1 bit per pixel
~-149 80 mfStackErr there is insufficient stack space
~-150 62 cMatchErr Color2Index failed to find an index
~-151 62 cTempMemErr QuickDraw ran out of temporary memory
~-152 62 cNoMemErr QuickDraw ran out of memory
~-153 62 cRangeErr there was a range error on a colorTable request
~-154 62 cProtectErr the colorTable is protected
~-155 62 cDevErr the graphics device is not valid
~-156 62 cResErr the resolution for MakeITable is invalid
~-157 62 cDepthErr the requested pixel depth is invalid
~-158 62 cParmErr invalid parameter
~-170 20 cmProfileError
~-171 20 cmMethodError
~-175 20 cmMethodNotFound CMM is not present
~-176 20 cmProfileNotFound
~-177 20 cmProfilesIdentical the profiles are the same
~-178 20 cmCantConcatenateError the profile can't be concatenated
~-179 20 cmCantXYZ CMM can't handle XYZ space
~-180 20 cmCantDeleteProfile
~-181 20 cmUnsupportedDataType
~-182 20 cmNoCurrentProfile
~-185 80 badExtResource an extended resource has a bad format
~-186 80 CantDecompress a resource can’t be decompressed
~-188 80 resourceInMemory the resource is already in memory
~-189 80 writingPastEnd the program tried to write past the end of the file
~-190 80 inputOutOfBounds the offset of count was too small or too big
~-192 80 resNotFound a resource was not found
~-193 80 resFNotFound the resource file was not found
~-194 80 addResFailed AddResource failed
~-195 80 addRefFailed AddReference failed
~-196 80 rmvResFailed RmveResource failed
~-197 80 rmvRefFailed RmveReference failed
~-198 80 resAttrErr a resource attribute doesn’t allow the operation
~-199 80 mapReadErr the resource map doesn’t allow the operation
~-200 86 noHardwareErr the required sound hardware is not available
~-201 86 notEnoughHardwareErr insufficient sound hardware is available
~-203 86 queueFull there is no room in the Sound queue
~-204 86 resProblem there was a problem loading a Sound resource
~-205 86 badChannel the Sound channel is unusable
~-206 86 badFormat the Sound resource is unusable
~-207 86 notEnoughBufferSpace there isn’t enough memory for the Sound Manager
~-208 86 badFileFormat the Sound format type is bad
~-209 86 channelBusy the Sound channel is busy
~-210 86 buffersTooSmall the Sound buffer is too small
~-211 86 channelNotBusy the Sound channel is not currently being used
~-212 86 noMoreRealTime there is not enough CPU time available to process the command in real time
~-213 86 badParam a parameter is incorrect
~-220 86 siNoSoundInHardware there is no Sound input hardware available
~-221 86 siBadSoundInDevice the Sound input device requested was invalid
~-222 86 siNoBufferSpecified no Sound buffer was provided
~-223 86 siInvalidCompression the Sound compression type is invalid
~-224 86 siHardDiskTooSlow the device is too slow for recording Sound
~-225 86 siInvalidSampleRate the requested Sound sample rate is invalid
~-226 86 siInvalidSampleSize the requested Sound sample size is invalid
~-227 86 siDeviceBusyErr the Sound input device is busy
~-228 86 siBadDeviceName the Sound input device name was invalid
~-229 86 siBadRefNum the Sound input device reference number was invalid
~-230 86 siInputDeviceErr a Sound input device hardware error
~-231 86 siUnknownInfoType unknown Sound information was requested
~-232 86 siUnknownQuality an unknown Sound recording quality was requested
~-240 88 noSynthFound no SPEECH device could be located
~-241 88 synthOpenFailed the SPEECH device could not be accessed
~-242 88 synthNotReady the SPEECH device is offline
~-243 88 bufTooSmall a SPEECH buffer was too small
~-244 88 voiceNotFound the requested voice wasn’t found
~-245 88 incompatibleVoice the requested voice could not be faked
~-246 88 badDictFormat the SPEECH dictionary format is bad
~-247 88 badInputText something is wrong with the SPEECH text
~-250 53 midiNoClientErr no client with that ID found
~-251 53 midiNoPortErr no port with that ID found
~-252 53 midiTooManyPortsErr too many ports are already installed
~-253 53 midiTooManyConsErr too many connections made
~-254 53 midiVConnectErr pending virtual connection created
~-5030 5 afpIconTypeError icon size specified different from existing icon size
~-5031 5 afpVolLocked volume is Read-Only
~-5032 5 afpObjectLocked object is M/R/D/W inhibited
~-5033 5 afpContainsSharedErr the folder being shared contains a shared folder
~-5034 5 afpIDNotFound
~-5035 5 afpIDExists
~-5036 5 afpDiffVolErr
~-5037 5 afpCatalogChanged
~-5038 5 afpSameObjectErr
~-5039 5 afpBadIDErr
~-5040 5 afpPwdSameErr someone tried to change their password to the same password on a mandatory password change
~-5041 5 afpPwdTooShortErr the password being set is too short: there is a minimum length that must be met or exceeded
~-5042 5 afpPwdExpiredErr the password being used is too old: this requires the user to change the password before log-in can continue
~-5043 5 afpInsideSharedErr the folder being shared is inside a shared folder OR the folder contains a shared folder and is being moved into a shared folder OR the folder contains a shared folder and is being moved into the descendent of a shared folder
~-5044 5 afpInsideTrashErr the folder being shared is inside the trash folder OR the shared folder is being moved into the trash folder OR the folder is being moved to the trash and it contains a shared folder
~-5045 5 afpPwdNeedsChangeErr the password needs to be changed
~-5046 5 afpPwdPolicyErr password does not conform to servers password policy
~-5060 10 afpBadDirIDType
~-5061 10 afpCantMountMoreSrvre the Maximum number of server connections has been reached
~-5062 10 afpAlreadyMounted the volume is already mounted
~-5063 10 afpSameNodeErr an Attempt was made to connect to a file server running on the same machine
~-5100 89 kSRNotAvailable the service requested is not available or applicable
~-5101 89 kSRInternalError a system internal or hardware error condition occurred
~-5102 89 kSRComponentNotFound a needed system resource was not located
~-5103 kSROutOfMemory an out of memory error occurred in the toolbox memory space
~-5104 89 kSRNotASpeechObject the object specified is no longer or never was valid
~-5105 89 kSRBadParameter an invalid parameter was specified
~-5106 89 kSRParamOutOfRange when we say 0-100, don't pass in 101
~-5107 89 kSRBadSelector an unrecognized selector was specified
~-5108 89 kSRBufferTooSmall returned from attribute access functions
~-5109 89 kSRNotARecSystem the object used was not a SRRecognitionSystem
~-5110 89 kSRFeedbackNotAvail there is no feedback window associated with SRRecognizer
~-5111 89 kSRCantSetProperty a non-settable property was specified
~-5112 89 kSRCantGetProperty a non-gettable property was specified
~-5113 89 kSRCantSetDuringRecognition the property can't be set while recognition is in progress -- do before or between utterances
~-5114 89 kSRAlreadyListening in response to SRStartListening
~-5115 89 kSRNotListeningState in response to SRStopListening
~-5116 89 kSRModelMismatch no acoustical models are avail to match request
~-5117 89 kSRNoClientLanguageModel trying to access a non-specified SRLanguageModel
~-5118 89 kSRNoPendingUtterances nothing to continue search on
~-5119 89 kSRRecognitionCanceled an abort error occurred during search
~-5120 89 kSRRecognitionDone search has finished, but nothing was recognized
~-5121 89 kSROtherRecAlreadyModal another recognizer is modal at the moment, so can't set this recognizer's kSRBlockModally property right now
~-5122 89 kSRHasNoSubItems SRCountItems or related routine was called on an object without sub-elements -- e.g. a word -- rather than phrase, path, or LM
~-5123 89 kSRSubItemNotFound returned when accessing a non-existent sub item of a container
~-5124 89 kSRLanguageModelTooBig can't build language models so big
~-5125 89 kSRAlreadyReleased this object has already been released before
~-5126 89 kSRAlreadyFinished the language model can't be finished twice
~-5127 89 kSRWordNotFound the spelling couldn't be found in lookup(s)
~-5128 89 kSRNotFinishedWithRejection property not found because the LMObj is not finished with rejection
~-5129 89 kSRExpansionTooDeep language model is left recursive or is embedded too many levels
~-5130 89 kSRTooManyElements too many elements added to phrase or path or other language model object
~-5131 89 kSRCantAdd can't add given type of object to the base SRLanguageObject (e.g.in SRAddLanguageObject)
~-5132 89 kSRSndInSourceDisconnected sound input source is disconnected
~-5133 89 kSRCantReadLanguageObject an error while trying to create new Language object from file or pointer -- possibly bad format
~-5199 89 kSRNotImplementedYet you'd better wait for this feature in a future release